Tag Archive for: wd helium hdd recovery tools

You are here: / / wd helium hdd recovery tools

Posts

WD141KRYZ-01C66B0 hdd firmware repair and data recovery steps

, ,

This is one very successful Western Digital HGST helium hdd firmware repair and data recovery case study from one Dolphin user in Turkey. The user has tried other software and solutions but failed to get the lost data back.

Patient HDD ID:

WD141KRYZ-01C66B0
14TB

Patient HDD Failure symptoms:

When trying to access data, full of bad sectors, no sectors are accessible
Status registers report UNC error and some other software report ABR error

WD141KRYZ-01C66B0 hdd firmware repair and data recovery steps

01: Connected patient hdd to DFL-SRP or DFL PCIe data recovery hardware;
02: Open DFL DDP data recovery software;
03: Power on patient HDD and wait until ready;
04: Click HGST translator recovery within the common repair section and wait until the log window reports ‘operation completed’.
05: Power off and on and users can access the data area successfully and all lost partitions, folders and files are available for immediate data recovery.

/0 Comments/by

WD140EDFZ WD161KFGX HUH721212ALE600 WUH721816ALE6L4 HUS728T8TALE6L4 WD8004VRYZ HDD Data Recovery Solution

, ,

It’s possible to recover the lost data from Western Digital Hitachi Helium drives at high success rate!

Data Recovery from Tested HDD models with UNC error:

WD161KFGX-68AFPN0
Capacity 16TB
WUH721816ALE6L4
Capacity 16T
WD140EDFZ-11A0VA0
Capacity 14TB
HUH721212ALE600
Capacity 12TB
WD8004VRYZ
Capacity 8TB
HUS728T8TALE6L4
Capacity 8TB

Failure Symptoms:

detected but data area was not accessible, full of bad sectors and reporting UNC error

Dolphin team have helped many users worldwide to recover the lost data from above or similar Western Digital helium hard drives!

Contact us to get the data recovery solution by sales@dolphindatalab.com or add Dolphin Skype ID: dolphin.data.lab

/0 Comments/by

Recover Lost Data from WD Hitachi Helium Hard Drives with UNC Common Firmware Failure

, ,

Data recovery labs receive more and more data recovery cases to get lost data back from Western Digital Hitachi Helium hard drives. Among all of these Helium hdd data recovery cases, UNC firmware failure repair and recovery is very common case.

It’s not possible right now to fix the common firmware failure of UNC by the existing hdd repair and data recovery equipment in the market but from now on, Dolphin team have found one unique data recovery solution to fix the UNC common firmware failure and finally get the lost data back.

There’re many WD Hitachi helium hard drives of 8T,10T,12T,16T,etc. Users can connect these patient drives to desktop computer SATA ports and test the hdds by one software to see if they report UNC error. Users can also connect these helium patient drives to the existing hdd firmware repair hardware and see if they report UNC error.

After the UNC error is confirmed, users can use the special common fw repair solution to get the patient drives repaired and finally get the lost data back. Sometimes users may get ABR errors from the patient Helium hard drives but ABR error usually indicates the patient helium hdd head damage failure or other failures. If physical failure, users need to swap heads to continue the recovery process.

If you wish to recover lost data from Western Digital Hitachi Helium hard drives, feel free to email to sales@dolphindatalab.com or add Dolphin Skype ID: dolphin.data.lab

/14 Comments/by