Posts

Dolphin Seagate Hard Drive Firmware Repair Tool and Data Recovery tool is one very good choice for IT engineers who wishes to repair Seagate hdd firmware failure or recover lost data.

Dolphin Seagate Hard Drive Firmware Repair Tool and Data Recovery tool contains both hardware and software.

As for Seagate hdd firmware repair and data recovery hardware, engineers have two choices below:

01: DFL-SRP USB3.0 portable hardware;
02: DFL-PCIe 4x hardware

As for Seagate hdd firmware repair and data recovery software, engineers have two choices below:

01: DFL-Seagate firmware repair software;
02: DFL-DDP data recovery software.

Firmware repair and data recovery solutions of Dolphin Seagate Hard Drive Firmware Repair Tool and Data Recovery tool:

01: Diagnose and execute repair commands within COM terminal;
02: Remove ATA Password;
03: Reset smart;
04: Read/write/edit firmware modules;
05: Read/write/edit ROM modules;
06: Unlock Seagate SED hard drives;
07: Set up head map, edit head map in RAM and ROM;
08: Repair Seagate hdd weak heads;
09: Quick firmware repair solutions are available (one button fix)
10: Image and extract lost data from Seagate weak hdds and hdds with many bad sectors;
11: Image data from good heads first and then weak heads;
12: Many more…

Engineers can find all details about Dolphin Seagate Hard Drive Firmware Repair Tool and Data Recovery tool here.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

This is one of success data recovery cases done by DFL engineer today for an India user. Here are the reported symptoms by user: case detection is good but the sectors are not accessible, I unlocked ROM and I read sector, every sector value was showing encrypted, so I decided to write back original ROM to patient, but the same issue persisted with no sector access, how to solve this problem? Read more

Within the new Seagate hdd firmware repair software, the COM terminal operations are running more smoothly and quickly.

With one simple B command, for example B3, users can get a support list of different baud rates for the current hard drive. Users can select 38400, 115200, 230400, 460800, 921600, 3000000, 6000000, etc to backup ROM or SYS files by COM mode. Please note some old drives don’t support high baud rates.

When the Seagate hard drive is unstable and not detected or busy, when the firmware area is locked(SED lock), the users need to operate with firmware area by COM mode.

DFL Users can download the latest Seagate firmware repair software from the user-only forum: https://forum.dolphindatalab.com/forum-18.html

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

This is one Seagate ST2000LM009-1R9174 hard drive firmware repair and data recovery case study for one DFL user in Mexico showing how to recover lost data from undetected busy hard drives.

Patient HDD ID:

Model : ST2000LM009-1R9174
Serial : WDZX0FXW
Firmware : SED1
Capacity : 3907029168 (1863.02GB)
Sector size : 4096
Heads number : Obtain failed

Patient HDD Failure Symptoms:

Undetected
Busy
Inaccessible data area
Many read errors output in the com terminal
LED

HDD Repair and Data Recovery Steps

Backup ROM;
Generate unlock ROM;
Write unlock ROM;
Send unlock key;
Enter F3 T>(Important to grasp the right time to enter F3 T>);
Backup NGlist;
View and confirm the NGlist entries;
Clear V4;
Regenerate translator;
Intialize by ID(Fix media cache)
Set up head map and image;
Select target VHD to extract lost file.

Finally all lost data was successfully recovered.

HDD Repair and Data Recovery Tools Used in this case study:

DFL Seagate HDD Firmware Repair Tool
DFL-DDP Data Recovery Equipment

Any question is welcome to [email protected] or add Dolphin official Skype ID: dolphin.data.lab

This is one undetected and unstable Seagate ST1000LM035-1RK172 hard drive data recovery case study for one DFL user from Australia. Read more

This is one complicated but successful Seagate ST3500511CS HDD firmware repair and data recovery case study for one DFL user in India.

Model ID: ST3500511CS
Capacity: 500GB
Firmware: CA14 4k
Donor HDD FW: SC13 512 bytes

The original patient HDD failures:

1, Undetected;
2, User wrote wrong SYS files from donor HDD to patient HDD;
3, Couldn’t do any write operations, read only, all SYS write failed;
4, Com terminal reports process defect list error if translator regeneration.

The following are detailed steps using DFL Seagate HDD repair tool and DFL-DDP data recovery tool to get all lost data back:

Step 1: …

Step 9:…

Dolphin users can read all detailed firmware repair and data recovery steps in Dolphin user-only forum here.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

This is one of data recovery cases done by Dolphin engineer today for an Asia user. The HDD ID information cannot be identified by program, unable to see firmware module list, all sectors are inaccessible either. Read more

This is one Seagate hard drive data recovery case study for one DFL user in USA who is one new user of DFL PCIe data recovery equipment. The patient HDD reports SIM Error 1009 and R/W read error.

The hard drive ID can be read properly but the COM port reports SIM error 1009 and R/W read error. Read more

This is one successful Seagate hdd firmware repair and data recovery case study for one DFL user in India.

HDD model number: ST1500LM012-1R817G; SN number: WDZ6KGYA Family: Rosewood A5
Firmware version: SBK2 Read more

This is one successful Seagate 8TB ST8000DM004-2CX188 data recovery case study for one DFL user in Peru.

Patient HDD ID details:
Model number: ST8000DM004-2CX188
SN number: ZCT1A0T1
Head Number: 8 Read more