Posts

When users receive Toshiba hard drive data recovery cases of head failure, users need to diagnose the hdd head failure properly and use correct data recovery solutions.

Toshiba hdd failure symptoms:

Clicking noises;
Busy;
Working slowly;
Undetected/wrongly detected.

HDD Repair tools and data recovery tools required to fix Toshiba patient drives with head failure:

DFL-Toshiba HDD firmware repair tool
DFL-DDP data recovery equipment

Data Recovery Solutions required to fix Toshiba patient drives with head failure:

01: Toshiba HDD Heads read/write test;

02: Edit head map within SA area;
03: Set auto virtual translator within disk image settings for unstable Toshiba patient hard drives;
04: Set up head map for imaging good heads first and then image weak heads;
05: Swap heads by Toshiba hdd head replacement tools within clean room.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

From this article, users can learn about the firmware repair and data recovery solutions of DFL-SRP USB3.0 all in one data recovery equipment to fix Seagate head-damaged hard drives.

Seagate HDD Head failure means the patient drive has something wrong on the hard drive read or write heads and therefore the data area could not be accessed normally.

Head failure can be weak head, single head damage, multiple heads damage or total heads damage. To fix these hdd head failure, users get the following data recovery solutions from Dolphin data recovery hardware tools:

01: Test heads within COM terminal;
02: Edit head map in the ROM;
03: Edit head map in the RAM;
04: Adjust head flying height/head working temperature;
05: Hot swap to access firmware area;
06: Head map setup for imaging good heads first and then imaging weak heads;

All above functions for fixing Seagate hdd failure are available within DFL Seagate hdd firmware repair tool.

07: Seagate head replacement tools and Seagate SLIM hdd head replacement tool for Seagate hdd head swap in clean room;

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

Dolphin Data Lab has created one unique firmware repair and data recovery solution for Western Digital slow hard drives including the WD SMR hard drives. This new function is called ‘Adjust Adaptive Parameters’.

Western Digital HDD Slow Issue types:

01: Firmware slow-users can fix the corrupted firmware modules to fix the slow issue. DFL-WD HDD Repair Tool offers one-click slow fix solutions: Common>Common Repair>Slow Fix for traditional WD hard drives and DFL-DDP data recovery tool offers easy-to-use slow fix for WD SMR hard drives: DDP>Western Digital>Change Disk Configuration>Set the sector r/w response time.

02: Physical slow-users need to use the new data recovery solution to enhance the head r/w capabilities and make the drives read/write quickly. Menu path within DFL-WD hdd repair tool: Common>Adjust Adaptive Parameters

Please note: Some WD hard drives are full of bad sectors due to head corruption and users need to swap heads to fix and get lost data back.

Users can watch the video instruction here on how to use ‘Adjust Adaptive Parameters’ for data recovery without head swap.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

Dolphin Data Lab has created one new Seagate hdd firmware repair function specially for fixing Seagate faulty hard drives with LED status.

For Seagate patient hard drives, users cannot enter F3 T> and cannot do anything further to repair the corrupted firmware modules if the hdd suffers LED failure. It is something like the bluescreen of the computers.

To fix the Seagate LED HDD, there’re several methods:

01: Short connect;
02: Hot swap;
03: Boot ROM write+Loader

Now we create the 4th new and easier method: Disable Subsystem of the SA and this is something like the ‘disable 411’ within WD hard drive firmware repair software, very easy to use and very helpful in many Seagate LED cases.

Users can open DFL Seagate HDD repair tool, enter the software, select ROM Operations>ROM Edit>Disable Subsystem

Next users just need to write new rom to HDD and then users can bypass the LED status, go to COM terminal and enter F3 T>, finally users need to write back the original rom after firmware repair.

Next users can open DFL-DDP data recovery software and get all the lost data back easily.

Any question is welcome to [email protected] or add Dolphin skype ID: dolphin.data.lab

This is one successful case study of Western Digital Palmer HDD with PCB number 800069 for one DFL user in Italy.

Patient HDD ID:
WD10SMZW-11Y0TS0
PCB: 800069

Patient HDD Failure Symptoms:
Undetected
Data area was not accessed

WD SMR Palmer HDD Repair and Data Recovery Steps:

01: The user has swapped with one firmware unlock PCB of 800066 and the patient HDD was connected to DFL-SRP data recovery hardware;
02: Enter Kernel mode, backup rom, disable 411;
03: Firmware restart and re-enter program;
04: Backup firmware module 190;
05: Test firmware modules and found module 03 was damaged, checksum error;
06: Repaired module 190 and fixed the 03 corruption issue;
07: Enable 411 and firmware restart;
08: Install original 800069 USB PCB back and connected the external HDD to DFL-URE;
08: Load module 190/T2data to RAM within the data recovery software.

HDD Repair Tools and Data Recovery Tools used in this case study:

DFL-WD hdd repair tool
DFL-URE data recovery software

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

Dolphin Data Lab has created and released many new Seagate hard drive firmware repair videos and data recovery videos free for DFL users to download.

These videos are very helpful for users to understand the Seagate hard drive failures, firmware repair and data recovery solutions and users can use all DFL firmware repair tools and data recovery hardware tools more effectively and efficiently.

The following are the new videos added on Dolphin file share platform:

Data-Recovery-from-Head-Damaged-Seagate-Hard-Drives.7z
How-to-Fix-Seagate-ST5000DM000-Busy-HDD.7z
How-to-Fix-ST2000LM007-Slow-Firmware-Backup-and-Click-Problem.7z
How-to-get-the-head-map-of-Seagate-hard-drives.7z
How-to-Recover-lost-data-from-Seagate-ST4000DM004.7z
How-to-recover-lost-data-from-ST1000LM035-1RK172-Capacity-0-by-DFL-SRP-USB3.0-data-recovery-equipment.mp4.7z
How-to-Reset-Smart-Repair-Firmware-Corruption-For-ST4000NM0053.7z
How-to-Unlock-Seagate-Firmware-Area-Within-DFL-DDP-Data-Recovery-Program.7z
How-to-Work-with-Seagate-Patient-HDDs-for-Data-Recovery-At-High-speed.7z
Latest-Seagate-Hard-Drive-Firmware-Repair-and-Data-Recovery-Solutions.7z
Seagate Constellation ES.3 SED HDD Firmware and Data Recovery Steps.mp4.7z
Seagate Rosewood HDD Head Map Editing in ROM by DFL-Seagate HDD Repair Tool.7z
SEAGATE ST4000VM004 ST4000VX005 B2 HDD LED 0X0BD SPIN UP AND DOWN HDD Repair and Data Recovery Steps.7z
Seagate-External-Portable-Hard-Drive-ST1000LM038-Data-Recovery-Steps.7z
Seagate-LX-SSHD-Firmware-Unlock-Steps-by-DFL-Seagate-HDD-Repair-Tool.7z
Seagate-Portable-ST2000LM007-LED-HDD-Firmware-Repair-and-Data-Recovery.7z
Seagate-ROM-RAM-Loading-Slow-Fix.7z
Seagate-Rosewood-Portable-HDD-Partial-Sector-Repair-and-Recovery.7z
Seagate-SMR-Hard-Drive-Format-Data-Recovery-Steps.7z
Seagate-ST500LT012-Capacity-0-Head-0-Damaged-Data-Recovery-Steps.7z
Seagate-ST500LX025-SSHD-Firmware-Unlock-and-ROM-Backup-At-High-Speed.7z
Seagate-ST1000LM035-1RK172-LED-Undetected-HDD-Data-Recovery-Steps.7z
Seagate-ST1000LM035-Rosewood-AF-Capacity-0-HDD-Repair-and-Data-Recovery-Steps.7z
Seagate-ST1500LM012-1R817G-HDD-Recovery Steps.7z
Seagate-ST2000LM007-HDD-Head-Damage-Diagnosis-Recovery.7z
Seagate-ST2000VX000-Error-HDD-Firmware-Backup.7z
ST1000LM035-1RK172-EB01-Capacity-0-HDD-Repair-and-Data-Recovery-Steps-Case-Study-from-Indonesia-Data-Recovery-Engineer.7z
ST1000LM035-1RK172-FW-LVM1-Capacity 0-HDD-Repair-and-Data-Recovery-Steps.7z
ST1000LM035-All-Sectors-0-HDD-Repair-Data-Recovery-Steps.7z
ST1000LM035-Partial-Sector-Access-Auto-Repair.7z
ST1000LM048-2E7172-LED-HDD-Repair-and-Data-Recovery-Steps.7z
ST1000VX005-2EZ102-HDD-Firmware-Repair-Data-Recovery-Steps.7z
ST1500LM012-1R817G-HDD-Repair-and-Data-Recovery-Steps.7z
ST2000LM007-1R8174-Busy-Inaccess-Data-Area-HDD-Repair-Data-Recovery-Steps.7z
ST2000LM007-1R8174-Full-Disk-Red-Blocks-HDD-Repair-Data-Recovery.7z
ST2000LM007-1R8174-Janus-AF-Family-Data-Recovery-Steps.7z
ST2000LM007-1R8174-Seagate-Rosewood-Portable-HDD-Partial-Sector-Access-Data-Recovery.7z
ST2000LM007-1R8174-WDZCVF7K-Partial-Sector-Access-HDD-Repair-and-Data-Recovery-Steps.7z
ST2000LM007-SP-Regen-FAIL-Update-Mask-Data-Recovery-Steps_.7z
ST5000DM000-1FK178-HDD-Firmware-Repair-and-Data-Recovery-Steps.7z
ST5000LM000-2AN170-Hard-Drive-Firmware-Access-and-Repair.7z
ST8000DM004-2CX188-Busy-Undetected-HDD-Data-Recovery-Steps.7z
ST8000NM0105-Unlock-Video.7z
More data recovery videos are coming…

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

This Seagate ST2000LM007-1R8174 faulty hard drive was capacity 0 detected and after initial firmware repair there’re many bad sectors by logical scan.

Patient HDD ID:

Model : ST2000LM007-1R8174
Serial : WDZKYE4W
Firmware : EB01
Capacity : 3907029168 (1863.02GB)
Sector size : 4096
Heads number : 4

FW info : Obtained
FW version : R1AEA069E.SDM4.AA4901.EB01
FW package P/N : 100849195
FW ID : 00305567
FW creation date : 2019/01/22
FW creation time : 20:23:31
CFW version : R1AEA069E.SDM4.AA4901.01618036.0
SFW1 version : 0305567.EB01

Modules list : Obtained
Modules number : 57

Patient HDD Failure Symptoms:

Undetected/wrongly detected/Many bad sectors

Required HDD repair tools and Data Recovery Tools to recover lost data:

DFL Seagate HDD Repair Tool
DFL DDP Data Recovery Equipment

HDD Repair and Data Recovery Steps:

1, Backup ROM;
2, Generate unlock ROM and write unlock ROM;
3, Power off and on and send unlock key;
4, Backup important sys files;
5, Clear g-list, clear smart;
6, Initialize ID (ATA), clear media cache, disable vacant active, etc.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

This is one successful Western Digital hard drive firmware repair and data recovery case study for one Dolphin user in Peru.

Patient HDD ID:

WDC WD5000LPVX-80V0TT0
WD-WXQ1E34CLXH4
465 GB(976773168)
SPT: 1437
Family: HUBBLELT

Patient HDD Failure Symptoms:

Inaccessible data area, full disk bad sectors

Required HDD repair tools and data recovery tools to fix the faulty hard drive:

DFL-WD hdd repair tool
DFL-DDP data recovery equipment

Patient HDD repair and data recovery steps:

1, Backup ROM and key firmware modules;
2, Slow fix;
3, Test firmware modules and found the module 32 was corrupted and couldn’t be read;
4, Wrote donor module 32;
5, Right click on module 32 and clear the module;
6, Restart firmware;
7, Open DFL-DDP data recovery equipment and the lost partition and folders and files were all recovered.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

This is one nice data recovery case study from one DFL user in India, the patient drive is firmware locked and the data area is not accessed.

Model : ST1000VX005-2EZ102
Serial : Z9CC69D2
Firmware : CV11
Capacity : 1953525168 (931.51GB)
Sector size : 4096
Heads number : 2

Rst 0x40M
2Sync:01 0E

EDAC Value = 00000000FFFFFFF5

EDAC Value = 00000000FFFFFFF5
Retry delay

EDAC Value = 00000000FFFFFFF5

EDAC Value = 00000000FFFFFFF5
Retry delay
LD: Size:00000028 HBlocks:0000 Size:002BD17F HBlocks:0032 Size:00282A49 HBlocks:0032 FlashRestore 00000000 00000028 ECBD
PP: Size:0000B400 HBlocks:0000 FlashRestore
PVTSize: 000150C8 CompSize: 000002B2 DeCompSize: 000150C8 00000000 000002B2 9E03
2Sync:00 04
DSP022B
No HOST FIS-ReadyStatusFlags 0002A1A1
2Sync:01 0C
Boot 0x40M

SpinUp
RECOV Servo Op=0100 Resp=0005
RECOV Servo Op=0055 Resp=0005[LBA=0x00006B6F]N[LBA=0x00006C28]N0[LBA=0x00006D5D]N0[LBA=0x000070A1]N0[LBA=0x000070C2]N0[LBA=0x0000737C]N0[LBA=0x000073EB]N0[LBA=0x000074EE]N0[LBA=0x00007500]N0[LBA=0x0000775C]N0

Trans
Rst 0x40M
2Sync:01 0E
2Sync:01 0E
2Sync:01 0E
2Sync:01 0E
2Sync:01 0E

(P) SATA Reset

LD: Size:00000028 HBlocks:0000 Size:002BD17F HBlocks:0032 Size:00282A49 HBlocks:0032 DiscRestore 00000000 00000028 04ED
PP: Size:0000B400 HBlocks:0000 DiscRestore
PVTSize: 000150C8 CompSize: 000002B2 DeCompSize: 000150C8 00000000 000002B2 9E03
2Sync:00 04
DSP022C^c

ASCII Diag mode

F3 T>^l

Diagnostic Port Locked

To fix above patient drive, the user used DFL Seagate hdd repair tool to backup rom, generate unlock rom, write unlock ROM, power off and on, send unlock key, backup important SYS files, clear g-list, regenerate translator, etc.

After fixing the firmware area, the users tested the data area and found there’re some bad sectors in the front, the middle and ending parts of data areas were accessible.

The user set up head map, edited the LBA range to image the patient hdd by heads within DFL-DDP data recovery equipment and finally most data was recovered, only some system files were missing which are not important at all.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

Dolphin Data Lab has released the new DFL all in one data recovery software V20230301 to work with the data recovery hardware tools.

The new V20230301 data recovery software has been uploaded to DFL user-only forum and users can login the forum to upgrade to the latest. It’s strongly recommended for all DFL users to upgrade to latest for the best firmware repair and data recovery success rate.

What’s new in this new software upgrade?

01: ST8000NM0105 G001 G004 Firmware Repair Support Added to DFL Seagate HDD Repair Tool, other firmware versions can be unlocked with old software. There’s now a new mode option-Mode 2 when users are trying to generate the unlock ROM, users need to select mode 2;
02: Seagate SMR hdd format data recovery such as rosewood EB01 format recovery;
03: Seagate weak head repair for new F3 families for data recovery purpose, it is very helpful for some weak head cases which don’t require head swap;
04: DFL-DDP image setting enhancement: enhance success rate for the following drives and cases:
WD SMR drives with all sectors 0000, Seagate drives SEDU, 241A, etc.
05: Full firmware repair and data recovery software codes improvement to get the software working more smoothly and excellently;

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab