DFL-WDII has been stopped for software upgrade but users can continue using the previous version of software with this hardware.
DFL-WDII is one western digital hard drive firmware repair hardware tool and it is used to repair WD hdd firmware failures, edit HDD ID, reset smart, remove password, repair bad sectors. Dolphin team has offered free software upgrade to all users for over 3 years. Read more
Dolphin Data Lab has released the latest WD upgrade program for both DFL-WDII and DFL-FRP hardware and the latest version is V2.55 and users can download them based on the hardware in use from the user-only forum.
What’s new in DFL-WDII version 2.55? Read more
Dolphin Data Lab has worked out the new hardware-DFL-FRP (Firmware Repair Plus), users with DFL-WDII old hardware are able to upgrade to this latest hardware.
DFL-FRP has one SATA port, one IDE port and these two ports are working independently, users can repair two drives at the same time. Besides, users can also operate on one WD USB disk by connecting the USB hard disk to the PC. Users will be able to select the USB channel when entering the program. Read more
Dolphin Data Lab has recently got some WD 4TB hard drives from our clients and the following screenshots were offered by our Domestic Chinese engineers using the Chinese version of our tools. Please note that Dolphin Data Lab offers full-English version data recovery tools too.
The following image explains DFL-WDII hdd repair tool is used to recognize the 4TB hard drive ID details and read firmware modules: Read more
We have handled many WD PCB1692 series 2.5″ hard drives with some tips entering the safe mode.
For 2.5″ PCB1692 or series after, it’s not a problem to read ROM when the hard drives are recognized. But it’s a problem when we tried to write ROM and it’s quite often to make the PCB dead by writing ROM to it.
The success rate is not high to enter safe mode by short connecting on 1692 series. The best way to enter safe mode for 1692 series is to separate the PCB, anyway, pls don’t remove the PCB.
Users just need to remove the two screws on the PCB to control the heads contact and insert one biz card and then power on and wait until the motor stops spinning and then the hdd enters kernel mode and next the ROM can be read and written.This also helps to read firmware modules for some hard drives with bad heads. Read more
We have recently setup the Australia sales and support center for all Dolphin Data Lab data recovery tools including the latest DFL-DDP USB3.0 data recovery equipment, DFL-DE data recovery tool, DFL-WDII hdd repair tool, head and platter swap tools, microscopes, high-speed flash programmer, COM cable plus, etc.
This is one close cooperation with our Partner-Dolphin Data Recovery Pty Ltd and this support and sales center will offer more professional and localized and fast support to clients from Australia.
If users want to check live demo of Dolphin Data Lab data recovery tools and the latest data recovery technologies in Sydney Australia, users can contact Dolphin Data Recovery Center Australia or contact our head office Dolphin Data Lab in Chengdu. Read more
This HDD ID:
Model: WDC WD1600BB-55RDA0 Family: Starling MicroCode: 20AB
This hdd was received as one dead hdd without any response when the user tried to powered on the hdd.
After initial diagnosis to the hdd, it was due to the burnt PCB causing the death. The user found one compatible PCB of the same PCB number and swaped the PCB.
After swapping the PCB, powered on the HDD, the hdd reached readiness but not detected. Read more
Hello to respected clients from USA, we have great news for you we have one more USA reseller who is able to offer local sales and technique support to you.
We have recently signed contract with PC Warehouse in NJ USA and they have right now a good stock of our DFL series data recovery tools including DFL-WDII hdd repair tool and DFL-Data Dr. Pro USB3.0 data recovery equipment.
Users can order these tools from them directly for faster shipment and more local and better support due to time zone difference. Read more
DFL-WD II hdd repair tool offers the users options to repair WD USB hard disk drives.
This article gives you the general idea of what functions are available with USB hdds.
DFL-WDII offers two channels: ATA and USB channel. For WD USB HDDs, users need to select USB channel. For USB hdds which can be detected and become ready in DFL-WDII, for WD USB hdds which have had PCB swap from USB interface to SATA interface or which have been converted from USB interface to SATA interface. Read more
Within 2013, Dolphin Data Lab is offering better-supported, better-functioned and better-priced hdd repair tools and data recovery tools to all engineers worldwide.
Dolphin Data Lab has named the first month of 2013-January as the gift month to all clients who are going to use DFL series data recovery tools. Within this month, we are offering the high-speed USB programmer Pro. for free if you buy DFL-DE data recovery tool and DFL-WDII hdd firmware repair tool. Read more
One-stop data recovery tools and advanced data recovery training courses.
Digital Multimeter Pro.
Original price was: $103.00.$89.00Current price is: $89.00.
Head and Platter Swap Pro. Advanced
Original price was: $680.00.$550.00Current price is: $550.00.
Western Digital Hard Drive Firmware Repair Package
$920.00