Dolphin Data Recovery Assistant Pro.

Description

Free to use for one month!
Full Functions, Try it now!

Dolphin Data Recovery Assistant Pro. is one software-only data recovery assisting tool, it is not used to recover data directly but all data recovery engineers need it to enhance data recovery efficiency and maximize all engineers’ data recovery success rate!

All data recovery engineers can purchase Dolphin Data Recovery Assistant Pro., download the latest software, install it, activate it and then get it working immediately for your data recovery success!

Dolphin Data Recovery Assistant Pro. contains 7 modules:

01: Invalid Files;
02: Extension;
03: N.S Image;
04: Database Repair;
05: Raid Analysis;
06: File Rename.

Each module is very helpful for data recovery success! Please check details below:

Dolphin DR Assistant-Module ‘Invalid Files’

This module is used to organize the data for data recovery cases with many bad sectors, weak heads, scratched surfaces, etc. When the data was recovered from these cases, many files are corrupted and there’re also some other invalid files too within the recovered data. At this time, Dolphin DR Assistant can be used to find out the invalid files, delete empty folders, delete invalid files of ‘tmp’, ‘tem’, ‘temp’, ‘~’, ‘?’, ‘Ink’, delete files if ‘DEADDEAD’ accounts for 50% or above of files’ hex data. Besides, users can delete the invalid files according to file types.

Dolphin DR Assistant-Module ‘Extension’

This module is specially used to correct the file extensions by changing the wrong extensions to the original correct extensions. For example, users can easily correct the .chk files in ‘FOUND’ folders to normal recognized file extensions so that users can open the files successfully.

Dolphin DR Assistant-Module ‘N.S Image’

‘N.S Image’ module is used to image the drives with non-standard sector sizes of 518, 520, 522, 528, etc to target drives or to a file with standard sector size of 512 bytes. Drives with non-standard sector sizes are usually used in NetApp, EMC, HP, Hitachi/IBM high-end storage devices, common data recovery tools cannot even analyze them or image them. These drives appear as server Raid drives and therefore, users need to image all of the drives and analyze them, find out the necessary parameters, rebuild the raid array and finally get lost data back. During the recovery process, the conversion from non-standard sector sized hdds or image files to standard sector sized ones is very important and this is why users need to use Dolphin DR Assistant ‘N.S Image’ module.

Dolphin DR Assistant-Module ‘Repair DB’

This is one easy-to-use database repair software module, it is mainly used to repair SQL Server corrupted databases. All users need to do is to select the corrupted database, select the repaired database save path and add the backup database and then the ‘Repair DB’ software will automatically repair the damaged database and save them.

• The ‘Repair DB’ software module is mainly for repairing corrupted databases caused by bad sectors or scratched surfaces.

Dolphin DR Assistant-Module ‘Raid Analysis’

‘Raid Analysis’ module is specially designed to generate one detailed engineering log report file which contains the parameters of ‘Disk Order’, ‘Raid Type’, ‘Block Order-Left/Right, Synchronous/Asynchronous’, ‘Block Size’, ‘Parity Delay’, etc. For skilled raid recovery engineers, it takes several minutes to find out those parameters from the engineering report file and then it’s easy to rebuild raid array and find all lost data back. Without this file, it may take several hours or longer and very complicated for some raid types and cases and it is not possible to get the raid cases fixed for beginners!

• VRAID(virtual raid) is not supported for engineering log file generation, the following are common VRAID tech. adopted:NETAPP
  EMC VNX
  IBM V3500 V7000
  HP: EVA4400 EVA6400 EVA8400
  DELL: PS EQ6100

Dolphin DR Assistant-Module ‘File Rename’

‘File Rename’ software module is very helpful in many data recovery cases. When the files lose their original names by raw recovery, recovery by file types, virus’s malicious modification, etc, users can use Dolphin DR Assistant to rename those files by extracting the date, Sheet name(excel), content, size. Our engineers are usually using ‘content renaming method’ frequently so that we can easily find out the wanted files we need.

Dolphin DR Assistant-Module ‘Setting’

Users can set the parameters differently according to different cases.

About License

One computer, One license! Users just need to download the software, open the software, click register to generate the license file to Dolphin team and Dolphin team will help to activate the software.

Dolphin Data Recovery Assistant Pro. Videos Below:

Video Introduction to Dolphin Latest Data Recovery Assistant Pro
How to Organize Your Data by Using Invalid Files Module of Dolphin Data Recovery Assistant Pro.
How to Rename Files for Raw Data
How to Test and Repair SQL Server Databases
How to correct file extensions by changing wrong extensions to original correct extensions

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab