MCMT table is corrupted No HOST FIS-ReadyStatusFlags 0002A1A1 Fix and Recovery
The following is one typical Seagate F3 HDD data recovery case study.
Boot 0x80M
MC000Y
0001
SpinUp
TCC:0020
Trans
Tech Unlock Handshake: 0xFFCF20F2
Reply:
Rst 0x80M
MC000Y
0001
(P) SATA Reset
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
No HOST FIS-ReadyStatusFlags 0002A1A1
ServoDiscSlip Time = 00000021
TCC:0022 EMCDataErr:00000018
ASCII Diag mode
Tools used to fix this kind of patient HDD:
DFL Seagate HDD Firmware Repair Tool
DFL DDP Data Recovery Equipment
Steps to fix this kind of patient HDD:
1, Enter F3 T>;
2, Switch to a higher baud rate to work with firmware operations;
3, Backup NGlist;
4, F3 Common Repair>MCMT Fix;
5, Clear Glist;
6, View and confirm the NG-list entries;
7, Clear Smart and Regenerate translator;
Any question is welcome to sales@dolphindatalab.com or add Dolphin Skype ID: dolphin.data.lab