users can learn more about head replacement and platter swap tips from the category.
Mechanical hard drive is the highest degree precision computer mechanical component, its internal cleanliness is cleaner than10 clean environment. HDD is driven by a high-speed motor to rotate counterclockwise, the voice coil motor powers drive heads for read and write operations on the platter. Read more
SCSI hard drive is not used by common PC users but used in some special fields such as audio recording, video editing, web servers, media streaming servers, gaming systems.
The following is one SCSI hard drive opened in clean room environment which has a capacity of 4.3GB and 12 platters and 80 pins. It is 80-Pin SCA-2 SCSI hard drives / Discs / Disks (Hot Swap) for servers with hot-pluggable back-planes.We seldom find such kind of drives now and therefore post it for sharing: Read more
Dolphin Data Lab is offering comprehensive professional and most cost-effective head and platter swap tools and components to all clean room data recovery engineers.
Many people are asking what kind of physical head and platter swap tools to buy to work on those dead hard drives due to head damage or motor stuck and this article will give you one general idea of the head and platter swap tools Dolphin Data Lab is selling. Read more
When users are going to replace heads or platters in a clean room environment to get the lost data back, it’s a must for these users to learn about each physical component what it is and how they work.
Today let’s check some of the most important physical components: Heads, Platters, PCB.
The platters contains the data and the heads contains read heads and write heads to read data from platters and write data to the platters. PCB is another very important physical component, it contains not only some of the firmware codes like ROM, but also controls the electrical components to offer power to the hard drive running. Read more
When we are talking about dead hard drives, we usually refer to those which doesn’t spin up at all, no hdd working sounds, no response and they look dead. Actually some of these so-called dead hard drives are still alive and these drives can be still repaired and recovered.
If the driver IC is burnt, the PCB won’t power up at all, users can swap with one donor driver IC or swap the whole PCB with original ROM/bios chip transferred;
If the PCB is burnt or other electrical components of hard drives are burnt, the hard drives won’t be powered on and won’t spin up at all. At this time, users just need to find one compatible PCB with the same PCB number from the same family and put on the dead hard drives and then manage to regenerate the original ROM to recover the data;
If the motor of the dead hard drives is stuck, users need to disassemble the hard drives and remove the platters to a donor hard drive to read data from.
We have recently received many inquiries asking to buy the head and platter swap tools from Dolphin Data Lab and some of them asked one question-is clean room a must for physical head replacement and platter swap?
According to our experience and many serious data recovery companies, the answer is definitely ‘yes’!
First, we must say data recovery is one serious art, to have one clean room or at least one clean bench will definitely maximize the physical data recovery success rate. To have one clean room or clean bench to handle the physically damaged hard drives such as head damaged hard drives, motor stuck hard drives or downgraded heads without r/w capabilities. Read more
Physical head and platter swap is one of the most common data recovery cases and so far in the data recovery field, this kind of case is not for all data recovery engineers due to its complexity and requirement.
The key to get high success rate of head replacement and platter swap is continuing practice and learning from others’ experience;
To work on head and platter swap cases, users need firstly one clean room environment;
When users are swapping heads, users need to understand the hard drives with bad heads requiring data recovery from are usually called source drives or patient drives, the hard drives with matching good heads are usually called donor hard drives; Read more
One-stop data recovery tools and advanced data recovery training courses.
Western Digital Hard Drive Firmware Repair Package
$920.00
Dolphin All-in-one Data Recovery Adapter USB3.0 Version
Original price was: $999.00.$799.00Current price is: $799.00.
HDD ROM Chip Pin Reader Set
Original price was: $210.00.$155.00Current price is: $155.00.