Archive for category: News Releases

In order to make the data recovery training u-disk more helpful to all users, Dolphin engineers have created 25 more new WD HDD firmware repair videos and added them to the data recovery training u-disk.

Here is the list of them:

1, Head map editing in RAM vs ROM for WD drives;
2, How to backup WD hard drive firmware modules, tracks and ROM;
3, How to boot hard drive heads from head 1 when head 0 is damaged;
4, How to Disable Heads Simply and Run WD Auto HDD Repair;
5, How to edit the WD model and SN number after refurbishing WD drives;
6, How to Edit WD HDD ID;
7, How to find out the damaged head from clicking WD drives;
8, How to Fix WD Translator failure When Heads are read only;
9, How to fix WD Busy HDDs caused by Module 36;
10, How to Fix WD Slow Detection Problem When the Heads are Read only;
11, How to Format SA for WD Hard Drives;
12, How to Generate WD ROM For PCB before 1640 for data recovery;
13, How to get the Western Digital hard drive microcode;
14, How to Read and Write WD HDD Tracks and How to Extract Firmware Modules from Tracks;
15, How to read write and find Donor WD HDD ROM;
16, How to Recover WD hard drives full of Bad Sectors;
17, How to refurbish WD hard drives using common firmware;
18, How to refurbish WD hard drives with few bad sectors in simple steps;
19, How-to-repair-WD-hard-drives-offline-with-offline-power-strip;
20, WD HDD Bypass SA Fix Non-accessible SA;
21, WD Head Adaptive Data;
22, WD Standard firmware repair program vs wd auto repair program;
23, WDC WD20EZRZ-00PJMB2-Model and SN Editing-New WD HDD ID Edit;
24, Western Digital Hard Drive Head read and write test.

Dolphin data recovery engineers will create more videos on WD hdd firmware repair and add to data recovery training u-disk.

Some new IT engineers have recently asked us how to edit the hard drive serial number simply and quickly for all hard drive brands.

This might be not easy for most common IT people but if users have Dolphin DFL hard drive firmware repair tools, it can be very easy and quick to change the hard drive serial number. With DFL firmware repair tools, users can connect multiple hard drives to the firmware repair hardware and then users can open the firmware repair software for different hard drives connected.

Next users just need to simply click the Edit HDD ID menu, the program will list the HDD model number, Serial number, capacity, etc and users just need to simply replace the SN number with the wanted one and then click OK, power off and power on, the new hard drive serial number will appear.

The hard drive serial number can be saved in ID firmware module on platters or ROM on the PCB. The program will recognize the SN storage location and edit it correctly.

It takes usually about 15 seconds or less to complete the hard drive serial number modification and all users can use the DFL hdd firmware repair tools to edit the SN by simple clicks.

Dolphin team releases not only new data recovery tools, new data recovery and hdd repair functions, but also upgrades the manuals frequently with new PDF docs and videos.

Dolphin support team have just finished the DDP data recovery manual and all DDP users will get this new manual for free to use with the latest DDP data recovery software. Read more