Seagate LM Rosewood hard drive data recovery cases are more and more common in data recovery labs worldwide. Many of these data recovery cases suffer firmware corruption and some of them get physical head damage.
Read morelatest news about Dolphin data lab data recovery tools, data recovery training courses, data recovery solutions.
In the new Dolphin Samsung hdd firmware repair program, users can read and write the ROM properly and edit the head map in ROM efficiently for both Seagate Samsung hard drives and traditional Samsung hard drives.
Read more
This is one of success data recovery cases done by DFL engineer today for an Australian user. The patient drive cannot read PCB information and module list.
HDD ID
Patient drive: WD10TMVW-11ZSMS4
PCB:2060-771692-005 REV A
Family: HELIOS Capacity: 1TB
To recover the lost data perfectly from ST500DM009-2F110A, the user from UK has greatly combined the DFL Seagate HDD repair tool and DFL DDP data recovery equipment with the help of Dolphin support engineer.
Read more
This is one patient ST2000LM007-1R8174 HDD from one DFL user in Indonesia and its firmware version is EB01.
To recover lost data from these kind of Seagate Rosewood EB01 hard drives, users need to use the new DFL Seagate hdd repair tool with at least software version 3.0 and the latest software is V4.01. If users are still using the old version, please login the Dolphin user-only forum and download the latest software to upgrade.
This is Dolphin data recovery technique support team and this article is teaching how to recover lost data from HGST HTS541010B7E610 hard drives with DFL data recovery equipment.
Read more
Dolphin team are on the Dragon-boat festival holiday which lasts for three days from June 25 to June 27 2020 and we wish all the best to all Dolphin users.
Read more
DFL eMMC chip reader hardware has been upgraded and many users have received the new hardware from the new purchases.
Before the hardware upgrade, the eMMC chip reader supports 4 types of eMMC chips:
BGA 153/169
BGA 162/186
BGA 221
BGA 529
For these four chips, users don’t need to solder any wire, just simply put the chips correctly into the chip holder and users can read the chip data from PC.
After the upgrade, the signal interfaces are added onto the hardware and users can solder wires/signal lines to connect the other chips besides above 4 mentioned chip types. This requires good soldering skills.
After soldering the signal lines, users can connect the 162/186 SD connector to the SD card reader and then users can read the other chips too from PC.
Dolphin team keep working hard to improve all our hardware and software tools, please note: DFL eMMC chip reader all in one doesn’t contain any software, it works like one converter to connect the chips to PC and the pc will help to recognize the chips and display the data.
Any other question is welcome to [email protected] or add Dolphin skype ID: dolphin.data.lab
Hello Sir, This is Kabelo from Botswana and Please for me a data Recovery Equipment with the following specifications :
- disk Sense Hardware Unit
- Data Recovery Software
- Imaging Speed up to 500mb/s
- Automatics HDD diagnostics
Dolphin Data Lab has created one video on how to recover lost data from Western Digital Palmer and Charger families.
Palmer and Charger family PCB numbers and Models:
WD10SPZX-21Z10T0 2060-800066 (SATA)
WD10SMZW-11Y0TS0 2060-800069 (USB)
One-stop data recovery tools and advanced data recovery training courses.
Latest News
ST2000LM009 TotalEntries Retry Error UnrecovSectorCount HDD Repair and Data Recovery StepsFebruary 16, 2025 - 4:59 pm
Dolphin New Resellers Worldwide 2025 are Required for Data Recovery ToolsFebruary 7, 2025 - 4:35 pm
Dolphin Spring Festival 2025 Holiday NoticeJanuary 25, 2025 - 9:51 pm
Top rated products
-
Western Digital USB-SATA PCB Package
Original price was: $369.00.$245.00Current price is: $245.00.
-
DFL-SRP For Hitachi HDD Firmware Repair Tool
-
Head and Platter Swap Package 03
Original price was: $930.00.$720.00Current price is: $720.00.