latest news about Dolphin data lab data recovery tools, data recovery training courses, data recovery solutions.

DFL eMMC Chip Reader All in One Hardware Upgrade

DFL eMMC chip reader hardware has been upgraded and many users have received the new hardware from the new purchases.

Before the hardware upgrade, the eMMC chip reader supports 4 types of eMMC chips:

BGA 153/169
BGA 162/186
BGA 221
BGA 529

For these four chips, users don’t need to solder any wire, just simply put the chips correctly into the chip holder and users can read the chip data from PC.

After the upgrade, the signal interfaces are added onto the hardware and users can solder wires/signal lines to connect the other chips besides above 4 mentioned chip types. This requires good soldering skills.

DFL eMMC Chip Reader Signal Interfaces

After soldering the signal lines, users can connect the 162/186 SD connector to the SD card reader and then users can read the other chips too from PC.

Dolphin team keep working hard to improve all our hardware and software tools, please note: DFL eMMC chip reader all in one doesn’t contain any software, it works like one converter to connect the chips to PC and the pc will help to recognize the chips and display the data.

Any other question is welcome to [email protected] or add Dolphin skype ID: dolphin.data.lab

/by

Quote for a complete data recovery lab from Botswana

,

Hello Sir, This is Kabelo from Botswana and Please for me a data Recovery Equipment with the following specifications :

  1. disk Sense Hardware Unit
  2. Data Recovery Software
  3. Imaging Speed up to 500mb/s
  4. Automatics HDD diagnostics

Read more

/by

WD Palmer Charger HDD Recovery Video Guide

,

Dolphin Data Lab has created one video on how to recover lost data from Western Digital Palmer and Charger families.

Palmer and Charger family PCB numbers and Models:

WD10SPZX-21Z10T0 2060-800066 (SATA)
WD10SMZW-11Y0TS0 2060-800069 (USB)

Read more

/by

ST1000DM003 MCMainPORT Failed DWF Error Fix

,

This is one of success case done by DFL engineer in Korea yesterday. The user mentioned that the patient drive can spin up. But cannot get ID information, cannot back up sys file either. In the meanwhile, The terminal keep showing MCMainPORT failed error message.

HDD ID

Patient drive: ST1000DM003- 9YN162

PCB Number: 100664987

Read more
/by

WD20EFRX-68EUZN0 Undetected HDD Data Recovery Steps

,

This is one damaged patient hdd with firmware corruption and the model number is WD20EFRX-68EUZN0.

This user was from Ecuador in South America.

This user got used to the standard method to fix the corrupted firmware failure and used the bypass SA function and couldn’t fix the patient HDD and then applied the Dolphin remote support system.

Read more

/by

ST1000DM003-1CH162 Very Very Slow Fix Without Head Swap

,

This is one very interesting Seagate desktop HDD data recovery case for one DFL user in China.

The patient HDD ID: ST1000DM003-1CH162
Connecting to pc and pc got hang there.

Read more
/by

Seagate ST1000LM035 Flash Boot Code Digital Signature Failure Fix and Recovery

,

This is one of success case done by DFL engineer today for a Latin America user. The patient drive-ST1000LM035 cannot get ready, terminal message has been showing the error of “Flash boot code digital signature failure”

HDD ID

Patient drive: ST1000LM035   SN:WDENEFZ5   

Read more
/by

WD20EZRZ-00Z5HB0 HDD Slow Spin up and Down Fix and Recovery

,

This is one nice case study of WD20EZRZ-00Z5HB0 from Dolphin data recovery remote support system and Dolphin engineer used DFL-WD firmware repair tool to fix the case for the user from Vietnam.

Patient HDD ID Details:

Model number: WD20EZRZ-00Z5HB0
SN: WD-WCC4M0EAZ63L
Family: DIABLO3S
PCB: 1945 series

Read more

/by

ST1000DM010-2EP102 HDD Partial Sector Access Fix and Recovery

,

This is one patient HDD fixed by DFL Seagate firmware repair tool from one DFL user in Italy. The user can only access to very small part of the data area and most data were lost.

Patient HDD Details:
Capacity: 1TB
Model number: ST1000DM010-2EP102

Read more

/by

DFL All in One V2.1 Software Upgrade New Upgrade May 2020

Dolphin team are releasing the new all in one software V2.1 with many new firmware repair and data recovery solutions.

DDP version: V2.1
ST Version: V4.01
WD Version: V2.882
SS Version 1.337
HT Version: 1.383
FT Version: 1.571

New Firmware Repair features in DFL Seagate firmware tool V4.01:

Read more
/by