latest news about Dolphin data lab data recovery tools, data recovery training courses, data recovery solutions.

Unique Seagate Rosewood EB01 HDD Format Data Recovery Solution

,

Dolphin team have worked hard to add the unique Seagate Rosewood EB01 Format Data Recovery Solution to DFL hdd repair and data recovery equipment.

For Seagate Rosewood EB01 HDD format, it causes data loss and most data sectors become 0000 and there were no data recovery solutions before.

After suffering the HDD format, users may get about 10GB data in the front or get no data at all.

With Dolphin Unique Seagate Rosewood EB01 HDD Format Data Recovery Solution, users can get lost data fully recovered.

DFL HDD Repair and Data Recovery Equipment required:

DFL-SRP Seagate HDD Repair Equipment
DFL-DDP data recovery equipment

Users will get the new upgrade software from the Dolphin user-only forum and all DFL users will be more and more successful.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

/0 Comments/by

WD SMR HDD 2060-810035 Firmware Unlock without Firmware Unlock PCB

,

It’s now possible to unlock the firmware area for WD 2060-810035 SMR HDDs without special firmware unlock PCB if users have DFL-WD firmware repair tool.

DFL users can download the latest DFL all-in-one software V2.31 in the user-only forum to use the latest firmware unlock solution.

Firmware unlock steps:

Step 1: Remove original PCB;

Step 2: Read original ROM by HDD ROM Chip Pin reader, no need to solder rom chip off;

Step 3: Enter DFL-WD HDD Repair Tool, go to ROM Operations>Unlock ROM;

Step 4: Select original rom and the DFL WD program will automatically generate one unlock ROM;

Step 5: Write Unlock ROM by HDD ROM Chip Pin Reader, no need to solder rom chip off;

Step 6: Install original PCB to original HDD, users can connect original HDD to DFL-URE or DFL-UREP to backup module 190, repair 190 and then use auto loading tech. to image hdd or extract lost data directly.

In some WD SMR HDD cases, due to bad sectors, weak heads or surface issue, users may need to convert the USB interface to SATA to run disk image, users can use the WD SMR HDD data unlock SATA connectors.

Please note: Most WD SMR HDDs are supported to use the firmware unlock solution for data recovery purpose but there’re still few special ROM structures which are not yet supported.

Any question is welcome to [email protected] or add Skype ID: dolphin.data.lab

/0 Comments/by

WDC WD10TMVW-11ZSMS4 HDD Repair and Data Recovery Steps

,

This is one successful hdd firmware repair and data recovery case study for one DFL user from Malaysia. This WD patient HDD had both firmware failure and file system error.

HDD ID:

Model number: WDC WD10TMVW-11ZSMS4
SN: WD-WXV1C5280965

HDD Failure Symptoms：

Not detected;
Folder empty;

HDD Repair and Data Recovery Equipment used in this case study:

DFL-WD HDD Repair Tool
DFL-DDP data recovery equipment

HDD Repair and Data Recovery Steps:

Enter DFL-WD HDD repair program by kernel mode;
Disable 02 and firmware restart;
One click to repair common slow issue and test other firmware modules;
Enable 02 and firmware restart;
Enter DFL-DDP data recovery equipment software and selected file extraction module;
Lost partitions and folders were listed but the folders were empty;
Right click the partition and click menu ‘Scan Files>Fast Scan’ and all the folders were listed and at this time, the folders were full of data;
The users selected all the wanted data and then started the file extraction and finally all the lost files were perfectly recovered.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

/0 Comments/by

DFL-URE and HDD ROM Chip Pin Reader Help With Easier WD SMR HDD Firmware Unlock

More and more WD SMR HDD data recovery cases are coming to data recovery labs worldwide. DFL-URE data recovery express and HDD ROM Chip Pin Reader Help With Easier WD SMR HDD Firmware Unlock and data recovery.

DFL-URE or DFL-UREP contains the following modules:

DFL-WD hdd repair
DFL-Samsung hdd repair
DFL-DDP data recovery

How to Unlock WD SMR HDD Firmware Area without Firmware Unlock PCB

Step 1: Remove original PCB;

Step 2: Read original ROM by HDD ROM Chip Pin reader, no need to solder rom chip off;

Step 3: Enter DFL-WD HDD Repair Tool, go to ROM Operations>Unlock ROM;

Step 4: Select original rom and the DFL WD program will automatically generate one unlock ROM;

Step 5: Write Unlock ROM by HDD ROM Chip Pin Reader, no need to solder rom chip off;

Step 6: Install original PCB to original HDD, users can connect original HDD to DFL-URE or DFL-UREP to backup module 190, repair 190 and then use auto loading tech. to image hdd or extract lost data directly.

Video Demo on How to Unlock WD SMR HDD Without Firmware Unlock PCB: 

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

/3 Comments/by

Latest Dolphin CCTV DVR Data Recovery Pro. V3.51 is Released

Dolphin Data Lab has released the latest CCTV DVR data recovery software V3.51 and all Dolphin DVR users can download the upgrade software from the user-only forum.

Order Dolphin DVR Pro. Here for your best CCTV DVR data recovery success rate!

What’s new in Dolphin DVR Pro. V3.51?

Sony FDR-AX45, ILCE 7M4 video recovery support is added;

Panasonic DC-GF10, DC-S1H video recovery is added;
Canon EOS 200D II video recovery is added;
DJI UAV Mavic 2 Pro video recovery is added;
Canon EOS 650D, 700D, 760D, 800D, 1500D, M3, M6 Mark II, 77D, 850D, M50, M50m2 video recovery is added;
Canon PowerShot G7X Mark II, PowerShot G7X Mark III
SONY-FDR AX55, ILCE 9, ILME FX3, ILCE 7RM4 video recovery is added;
ARRI mini camera video recovery is added;
GoPro Hero9 video recovery is enhanced;
JingYi video recovery is enhanced;
JieDu Car driving recorder video recovery is enhanced;

DJI UAV OSMO 2 video recovery is enhanced;

…
Download Dolphin DVR Pro. V3.51 here.

What’s new in Dolphin DVR Pro. V3.41?

More Dolphin DVR Pro. features and highlights here

/0 Comments/by

DFL Data Recovery Hardware Tools Recover New Seagate Hard Drives

,

If users want to repair new Seagate hard drives firmware corruption or recover lost data from the new Seagate hard drives,  DFL Seagate hdd repair tool and DFL DDP data recovery tool are the best choices!

The following new families are properly supported:

Janus AF
Rosewood A5
Rosewood AE
Rosewood 8C
CheopsliteA 9B
CheopsliteA AD
CheopsliteA B2
Tatsu 97
M11 A1
Pharaoh Oasis 94
V9 A0
A2
Cimarron B5
Other new LM, DM series…

Besides above new ones, the traditional Seagate F3 hard drives and old T> drives are also supported well for both firmware repair and data recovery.

Many new Seagate hard drives have SED lock and users cannot access the firmware area directly. Users need to use DFL Seagate HDD repair tool to unlock the firmware area first and then users can backup the firmware modules and repair damaged firmware.

With DFL Seagate HDD Repair tool and DFL-DDP data recovery tool, users have the following solutions:

Repair capacity 0 Seagate HDDs;
Repair undetected Seagate HDDs;
Repair busy Seagate HDDs;
Unlock SED hdds;
Repair LED firmware corruption;
Edit head map in ROM;
One-click solution for many common firmware failures;
Partial sector access fix auto;
ROM module swap;
Head adaptive ROM generation;
Nohost ROM generation;
Firmware Unlock;
Seagate F3 Hot Swap;
LOD backup/write and write by COM;
SYS test;
NGlist editing/clearing;
Read/Edit/Write LBAs;
Repair by tracks;
HDD head flying height/ temperature adjustment;
Edit LBA;
Recover good data from good heads;
Image needed files only;
Source drive maximum data protection tech;
Image unstable drives and sectors;
Many more…

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

/0 Comments/by

Dolphin Data Recovery Hardware Tools Recover New Western Digital Hard Drives

,

Dolphin Data Lab has released the latest data recovery software V2.3 and this new software will help all DFL users repair firmware corruption and recover lost data from new Western Digital hard drives, for example the latest SMR hard drives with SED and MCU lock.

As for Western Digital hard drives, we have experienced the PCB series of 12XX, 14XX, 15XX, 16XX, 17XX, 18XX, 19xx, 800XX, 81XXX, etc.  All users need to check the PCB number of the WD drives and then users can easily judge if the WD drives are supported or not.

For old WD hard drives, the firmware area is not locked, users can easily access and backup the firmware modules, if not, users can load loaders to access the firmware; for some common hard drives, users can disable 02 or disable 411 to access the firmware area; but for new WD SMR hard drives, users need to use firmware unlock PCB or create unlock rom to unlock firmware area.

For new WD SMR hard drives, Dolphin data recovery tools have many unique and powerful hdd repair and data recovery solutions: to fix the SMR HDD slow firmware issue; to fix SMR HDD all sectors 0000 firmware issue; to fix SMR HDD inaccessible data area issue.

For WD hard drives, users have the following options of firmware repair and data recovery:

1, Firmware module read and write;
2, Edit firmware modules;
3, Re-generate firmware modules;
4, Re-generate ROM;
5, Fix Slow issue;
6, Edit head map in RAM;
7, Test and clear firmware module;
8, Convert LBA to CHS;
9, Extract firmware modules from tracks;
10, Backup firmware region and extract firmware modules from region;
11,  Change module size to read;
12, Change module location;
13, Bypass firmware read;
14, Disable module 02/411 to access firmware area;
15, Test heads quality;
16, etc;

More and more new WD hard drive data recovery cases are being fixed by Dolphin data recovery tools.

 

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

/0 Comments/by

How to Set The Target Disk Smartly for HDD Disk Imaging

,

To work with Dolphin DFL data recovery tools, it’s very necessary to set one target disk whenever users are trying to read from the original hard drives. DFL-DDP data recovery tool has one unique and very helpful disk imaging feature and that is to record all read operations to the target disk and all read sectors within the data drive will not be read for a second time.

So how to set a target disk smartly?

Users can image to drive: image data drive to target drive connected to DFL data recovery hardware, for example, image from SATA 0 to SATA 1, SATA 2, etc; image data drive to target drive such as external hard drives connected to pc; Image data drive to VHD/VHDX target disk.

Here Dolphin engineers strongly recommend to use VHD/VHDX as target drives. Users can connect one SATA hard drive with big capacity, such as 10TB to pc by the Universal USB to SATA adapter Pro., and then users can create multiple VHD or VHDX drives on this SATA HDD, next users can image different data drive to different VHD or VHDX drives. All these VHD(X) drives are independent from each other.

Why do we use SATA drive and the adapter, because SATA drives are much cheaper than external hard drives and the adapter helps to make the SATA drives portable easily.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

 

/0 Comments/by

DFL All-in-one Data Recovery Hardware Tool Version 2.3 Upgrade Software is Available

Dolphin team have created the latest software version 2.3 to work with DFL-URE, DFL-SRP and DFL PCIe data recovery hardware tools. All Dolphin users can download this software from the user-only forum here.

What’s New in DFL-DDP data recovery tool
Latest version: V2.3

190 repair manager which helps users to fix many 190 corrupted cases;
>Import Module 190 and Manage
>Extract the T2 Data(190 core nodes)
>Original Nodes List
>Scanned Nodes List
>List Nodes by Original Order
>List Nodes by Node Tree
>List Nodes by Start LBA
>SIT Repair
>Search Correct Blocks Auto
>Search and Replace
>Search Error Nodes
>Search Overlap Nodes
>TIS Check
>Vacant Nodes Count
>Overlap Nodes Count
>Tree Root Node Number Check
>Test Current Nodes
>Test All Nodes
>Test Tree
>Test Nodes by SMRZONE
>Scan Lost Nodes
>Repair Selected Nodes
>Delete Selected Nodes
>Delete Error Nodes
>Delete Nodes with Same Start LBA
>Delete Nodes with Same END LBA
>Repair Vacant Nodes with Scanned Nodes
>Caculate Valid Data from Selected Nodes
>Zerofill Bad Sectors within The Module
>Load 190/T2 auto for data recovery
Module 190/T2data auto loading; Without auto loading, many cases will fail because 190 loading to RAM may fail after power reset;
WD SMR HDD selective head image is running more smoothly;
New ZFS, BTRFS file systems support are added;
Non-Standard sector-sized HDD read and write is supported, for example sector size of 520B, 524B;
Time extraction from video streams for HKFS DVR is supported;
The new NTFS 4.0 is added to support;
WD SMR HDD TLER activation is added;
WD SMR HDD: change HDD configuration/WD slow fix, delete non-important firmware modules
Linux LVM file system support is added;
Block checksum algorithm for MDF fragmented file recovery is added;
Support now GPT with LDM volume;

Software interface optimization;
Toshiba selective head image algorithm optimization;
HKFS, NTFS, VMFS, Exfat file extraction optimization;
Other optimization

————————————————
What’s new in DFL WD hdd repair tool
Latest version: V2.990

Generate unlock rom with firmware unlock pcb, write unlock rom to original pcb to unlock fw;
Note: Unlock rom generation without firmware unlock pcb is available soon but 810035 unlock still requires special firmware unlock pcb, right now if users wish to unlock firmware without firmware unlock pcb, please email your rom to [email protected], we will generate unlock rom for users to write by HDD rom chip pin reader to unlock the firmware.
Read SMR Zone;
Read T2 Data;
Head map editing optimization: head number of 8 or above is supported.

————————————————
What’s new in DFL Seagate HDD repair tool
Latest version: V4.210

More new Rosewood 8C models are supported;
ROM editing optimization；
B2 HDD Data Corruption Repair is added (ST4000VX005、ST4000VM004);
ROM read/write is further enhanced;
ID editing by COM is optimized;
SYS read by ABA is added;
A-list regeneration is added;
NGlist regeneration is added;
Seagate New ST8000NM000A 8TB B5 Cimarron family firmware unlock solution is completed but coming soon in newer software upgrade;

————————————————
What’s new in DFL Samsung HDD Repair Tool
Latest version: V2.000

Head map editing is added;
ROM read and write for M024, M9T, m6s, m40s, t166 is added;
Samsung old hdd password removal has been added to support;

————————————————
What’s new in DFL Toshiba/Fujitsu hdd repair tool
Latest version: V1.600

MQ03ABB fw read/write support;
Cut zone optimization;
Standard capacity selection is added when editing ID;
46GSX family support is added;
MQ01(4K) G to P is added to support.

————————————————
What’s new in DFL Hitachi/IBM hdd repair tool
Latest version: V1.400

To save NVRAM and ROM by SN is added;
Boot remove password is added;
7210CLA3 support is added;

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

/0 Comments/by

How to Unlock WD SMR HDDs Firmware Area without Firmware Unlock PCB

,

It is now possible for DFL users to unlock the WD SMR HDDs firmware area on the original PCB without special firmware unlock PCBs.

The new solution for WD SMR HDD firmware unlock is available within DFL-WD hdd repair tool and to use this solution, users need to have DFL HDD ROM chip pin reader(Many users have already had this one.) and the steps are as below:

1, Remove the original PCB from data drive;
2, Read the original ROM from original PCB by the HDD rom chip pin reader set without soldering rom chip off;
3, Generate firmware unlock ROM;
4, Write unlock rom to original PCB by the HDD rom chip pin reader set without soldering rom chip off;
5, Install the original PCB to data drive and users can see the firmware area is already unlocked successfully;
6, Users can use DFL-WD hdd repair tool to backup important firmware modules, specially the module 190, smrzone, T2data, etc;
7, Users can image the HDD or extract lost data directly if users have DFL-URE or DFL-UREP by using DFL latest T2 auto loading tech;
8, If the original PCB is physically damagaed but the Main chip and ROM chip are still good, users can use the special firmware unlock PCB and then move the original main chip to the firmware unlock SATA PCB and write original ROM to the firmware unlock PCB for disk imaging or file extraction;
9, In some cases, users need to repair the damaged firmware module 190 or repair the SMR HDD slow issue to continue for data recovery.

The WD SMR HDD firmware repair and data recovery solution is more and more complete and successful and DFL users will be able to fix more and more new data recovery cases.

Please note: the new solution supports 800066, 67, 69, 77, 11, etc but doesn’t support 810033 and 810035 which have quite different rom structure and algorithms. For WD 810033 and 810035, users still need to get the special firmware unlock PCBs for firmware unlock.

Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab

/0 Comments/by