Dolphin team are able to help all Dolphin users on their SQL Server database recovery and repair cases. When users get cases they cannot handle, users can use Dolphin team as your last chance of data recovery success of all SQL server recovery and repair cases.
How to recover lost MDF/NDF databases?
Users can use database fragmented file reorganizing and rebuilding software to scan the partitions to get all possible fragmented database files and then reorganize and rebuild all the fragmented files into completed good files.
How to repair SQL Server Databases?
SQL Server Failure types:
SQL Server database suspect, virus attack, failed to attach the database, log file lost/corrupted, table data loss of DROP, DELETE, TRUNCATE, UPDATA, etc, recovered databases cannot be attached due to hdd bad sectors or other hdd failures, latch page read failure, redundancy error during database copy, system table corruption, index/page broken, etc.
For SQL Server database repair, users can try Dolphin DR Assistant Pro. to repair but please note: Dolphin DR Assistant Pro. is mainly for repairing corrupted databases caused by bad sectors or scratched surfaces.
To repair above failures, users need to use some sql server repair tool and need to have some good experience too. Some cases require manual analysis and whenever users cannot fix the cases by the database repair tools, users can email to [email protected] or add Dolphin Skype ID: dolphin.data.lab for free quote.
With DFL New Seagate HDD firmware repair tool, users can easily unlock the Seagate B2 HDD firmware area, fix the LED 0X000000BD spin up and down and other firmware corruption issue, fix the B2 undetected/wrongly detected issue, fix the inaccessible data area issue, etc.
The common Seagate B2 HDD models are as below:
ST4000VM004
ST4000VX005
After connecting the patient B2 HDD to the firmware repair hardware, power on the hdd, users get the repeating LED 0X000000BD COM terminal messages and the patient hdd spin up and down and up and down…
Whenever users get the Seagate B2 patient HDDs, please backup the original ROM, generate unlock rom, write unlock rom, backup important sys files. But if LED has appeared in the COM terminal, users need to backup the original ROM and then generate new ROM for LED repair within the new DFL Seagate hdd repair and then write the new LED repair ROM, next power off and on, the LED issue will be fixed and users can go to DFL-DDP data recovery software and all lost data can be listed for recovery.
If the patient B2 drives have suffered data corruption, users can see hex data but the data is not normally accessed. At this time, users need to use the new B2 Data Repair function and then the data corruption will be automatically repaired and DFL-DDP will list all the partitions and folders properly.
Video case study below:
SEAGATE ST4000VM004 ST4000VX005 B2 HDD LED 0X0BD SPIN UP AND DOWN HDD Repair and Data Recovery Steps
Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab
Please kindly be informed that Dolphin team will enter the National Day holiday during October 1-7, 2022 and will come back to work normally on October 8th, 2022.
Dolphin team will check and answer all emails during this 7 days’ holiday. Users worldwide can place orders without any issue. But all the product delivery will be postponed to October 8 since DHL express carrier will be closed during this period too.
Should you have any urgent issue and need immediate help, pls contact with your Customer Service Manager via email. We thank you all for your continuous support with us.
Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab
WD SMR 2060-810035 Spyglass II HDDs have both MCU lock and SED lock. To repair firmware corruption and recover lost data, users need to fix the MCU lock first: swap with special 2060-810035 firmware unlock PCB or writing unlock rom to bypass the MCU lock by DFL-WD hdd repair tool.
Please note: not all 810035 PCBs support MCU lock bypass by unlock ROM.
Most common HDD failures for WD SMR 2060-810035 Spyglass II HDDs:
The data area is not accessed;
The data area is full of 0000;
The drive is undetected due to 190 corruption;
Physical head damage.
Most common functions and solutions used in repairing and recovering WD SMR hard drives:
Read/write ROM by HDD ROM Chip Pin Reader;
Generate unlock ROM by DFL WD hdd repair tool;
Sort nodes within module 190 by LBA/tree;
Scan missing nodes;
Delete overlapped nodes/wrong nodes;
Repair wrong nodes, etc.
Users can save all the modification to one new module 190 and then users can write the new module 190 or load the module 190 or T2data to RAM by DFL-DDP data recovery equipment for immediate data recovery.
WD SMR 2060-810035 Spyglass II HDD Common PCB number and Models:
PCB number: 2060-810035-000 REV P0
WD40NDZW-11BCSS0 USB 3.0
WD40NDZW-11A8JS0
WD40NDZW-11A8JS1
WD40NMZW-59A8NS1
WD40NMZW-59BCBS1
WD50NDZW-11A8JS1
WD50NMZW-59BCBS0
WD50NMZW-11BCBS0
WD50NMZW-59A8NS1
WD50NDZW-11BCSS0
Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab
Dolphin team has released new DFL-WD hdd repair software and new DFL-ST HDD repair software and users can download these new software from Dolphin user-only forum. With the new DFL-WD hdd repair software, users can further enhance the WD SMR HDD data recovery success rate.
With the new software, users can unlock more WD SMR HDDs by the original PCB without using special firmware unlock PCB, 800041, 800066, 800077, 800069, 810011, 810035, etc.
With the new software, users can fix more WD SMR hdd format cases, more all-sector-0000 cases, inaccessible data area cases, etc.
Users can download the latest WD hdd repair software from the forum.
More WD SMR HDD repair and recovery cases and tips below:
WD SMR HDD WD20EZAZ 810011 DATA RECOVERY CASE BY DFL USER IN SRI LANKA;
WD SMR 800077 CARMEL HDD REPAIR AND DATA RECOVERY STEPS
WD SMR 800065 800067 810003 CHARGER HDD REPAIR AND DATA RECOVERY SOLUTIONS
WD 800069 800066 SMR PALMER HDD REPAIR AND DATA RECOVERY SOLUTIONS
WD SMR SPYGLASS SPYGLASS2 800041 HDD REPAIR AND DATA RECOVERY STEPS
Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab
With Dolphin DR Assistant Pro., it’s easy to repair corrupted SQL server databases at high success rate if the database corruption is caused by bad sectors or incomplete disk image from faulty drives with damaged heads or surfaces.
SQL Server Database Repair and Test Tips:
01: Users need to install the Microsoft SQL Server Management Studio;
02: Users cannot edit the database name, otherwise cannot repair the database;
03: Users need to have the database log file to attach and test the database;
04: Users need to learn about the database check command ‘DBCC CHECKDB(‘database name’)’.
SQL Server Database Repair Steps:
01: Open Dolphin DR Assistant Pro software;
02: Click ‘Repair DB’ module;
03: Select corrupted database path;
04: Select repaired database path, please note: the repaired database name need to be the same with the original database name, users can save the repaired database to a different path;
05: Add old database backup file;
06: Click ‘Ok’ and the software will repair the database automatically.
How to Repair and Test SQL Server Corrupted Databases
Any question is welcome to [email protected] or add Dolphin Skype ID: dolphin.data.lab
